Laboratories are under constant pressure to balance compliance, operational efficiency and growth. Traditional wired or short-range wireless laboratory monitoring systems demand multiple gateways, complex installation and high maintenance overheads — escalating costs, limiting flexibility and compromising coverage in challenging spaces. ProLog Enterprise with long-range wireless connectivity offers a different approach. By integrating a long-range, low-power wireless protocol into Contronics’ proven monitoring platform, laboratories are achieving building-wide coverage with a fraction of the infrastructure. Signals travel reliably through multiple walls, often allowing a single gateway to replace dozens of repeaters. This not only simplifies installation but reduces total network hardware requirements by up to 75% and cuts associated maintenance time. The system is already live across major NHS facilities, delivering seamless coverage across blood sciences and transfusion departments. Installed with future expansion in mind, additional sensors can be added without network reconfiguration — offering a flexible path to scalability. Feedback has highlighted faster deployment, lower running costs and stronger assurance that all areas and equipment are fully covered and compliant. Beyond connectivity, ProLog Enterprise delivers: • Seamless scalability – new sensors can be added without reconfiguring the network, supporting estates as they expand. • Reduced infrastructure burden – fewer gateways and repeaters lower installation complexity and ongoing maintenance. • Extended resilience – reliable transmission even through multiple walls and dense lab infrastructure. • Secure transmission – fully encrypted data from sensor to system, ensuring audit-ready integrity.

The dynamic mass flow rate regulator VEMD operates extremely quietly thanks to proportional valves. The integrated electronics with sensor detect, regulate and proportionally dose the flow rate of air, oxygen, nitrogen, argon and CO2. • Mass flow controller (MFC) with thermal flow rate sensor and integrated control electronics • Dynamic regulation with short response time • Operating medium: air, oxygen, nitrogen, argon, CO2 • The current flow rate value is available via the interface • Ideal for many applications where inert gases or oxygen need to be controlled • Sustainable operation thanks to efficient control

proSET bioreactors for all of your bioprocessing and cell cultivation needs. Manual or programmable control, it gives you complete control over your experiment to optimize your production process. Depending on your application and experimental needs, different optional devices are available to be integrated into the proSET systems. Whether it's cell cultivation, microbial fermentation, solid state bioprocessing of fungal applications, the proSET bioreactor provides the total package solution. CIP/SIP scale up vessels are also available upon enquiry

Protective and Comprehensive service solutions for your business Regular checks by our own service technicians or authorised service partners contribute towards avoiding breakdowns and their knock-on effects on your daily routine. Inspections include establishing the condition of a machine, a functional test and the safety of your equipment. Potential faults and wearing parts are detected before a fault manifests itself. In addition to this, we offer a variety of test processes.

Case packaging provides ultimate protection for your products. We supply a wide range of branded cases; with bespoke foam inserts that we design and manufacture ourselves to provide your products with high-quality protection. The benefit of using case packaging is that it is resilient and robust allowing, it to be reused multiple times. Protective case packaging assists with protection against liquid and dust ingress.

ProXcide® Mini is a small, portable hydrogen peroxide vapour (HPV) bio-decontamination device specifically designed for log-6 decontamination of small chambers and spaces, without compromising on log-6 efficacy. Under 20cm in height, ProXcide® Mini is equipped to provide rapid high level bio-decontamination in small enclosures such as bio-safety cabinets, isolators and pass-through chambers. ProXcide® Mini has been tested to deliver log-6 destruction of spore forming bacteria, and benefits from the extensive efficacy portfolio of the larger ProXcide® system, utilising the same world class technology to deliver verified and rapid decontamination in small spaces. Ian Morren, involved in the ProXcide Mini’s development, remarked: “There’s nothing else like the ProXcide Mini on the market. With the introduction of Annex 1, many companies have been searching for effective decontamination solutions for GMP compliance in smaller areas. The ProXcide Mini fills that gap, and feedback has been overwhelmingly positive."

The ProXcide® System uses innovative hydrogen peroxide vapour (HPV) technology for a rapid decontamination process tailored to each room’s requirements, ensuring log-6 kill efficacy on all surfaces validated by real-time data.

Monitoring -200°C to +650°C

This type of packaging is ideal when products are being transported in extended and rugged conditions. Made from recyclable materials, pulp-moulded products are also 100% recyclable which is beneficial for the environment. Pulp-moulded packaging can be stacked neatly on top of each other, saving you money on transport and optimising your warehouse storage. We design and supply UN-approved pulp-moulded products for hazardous and Ministry of Defence goods.

The Histomography Punch Scanner generates high-resolution 3D X-ray images of 5 mm FFPE tissue cores, achieving a resolution of 2.5 µm within a 4-hour scan. Sample preparation is simple: a tissue core is punched from the FFPE block and mounted onto a holder, with no staining or cutting required. The resulting 3D data is delivered directly through our cloud-based viewer.

A wildlife-conscious recombinant alternative to the conventional LAL assay In line with its sustainability ethics, Alpha Laboratories is delighted to introduce the new PYROSTAR™ Neo+ from FUJIFILM Wako. This endotoxin detection reagent has been developed by recombinant technology to provide a synthetic LAL assay alternative, designed with wildlife conservation in mind. This innovative product offers a non-animal derived solution for bacterial endotoxin testing (BET) in research, pharmaceutical, and medical equipment manufacturing. By replacing conventional LAL reagents sourced from Atlantic Horseshoe Crabs, PYROSTAR™ Neo+ helps reduce the impact on wildlife, while facilitating the same high sensitivity as PYROSTAR™ ES-F. PYROSTAR™ Neo+ utilises a recombinant 3 Factor system that replicates the equivalent cascade reaction of traditional LAL assays. It boasts improved specificity with the absence of Factor G, and eliminates interference due to reaction with β-glucan. Additionally, it has an optimised formulation to support handling of difficult sample matrices which cause interference. The Neo+ reagent contains a pNA chromogenic group, enabling detection of the assay results on an absorbance plate reader using a colorimetric method recombinant cascade reagent (rCR) assay. The endotoxin test offers clear ethical and environmental advantages over the traditional LAL test, including its compliance with the 3Rs principles of replacement, reduction, and refinement of animal testing. For a limited time only, save 10% off Neo+. Visit our website or quote offer code PN0724. Offer ends 31st October 2024. Please visit www.alphalabs.co.uk/neo+ for further information or contact Alpha Laboratories on 0800 38 77 32 or email marketing@alphalabs.co.uk

Dynamic Image Analyse | Particle Size and Particle Shape from below 1 µm to 34,000 µm The modular image analysis sensor QICPIC combines size and shape analysis of disperse particle systems within a size range of < 1 µm to 34,000 µm. Flexible sensor adaptation for analysis of powders, granules, fibres, suspensions and emulsions is provided by a wide range of dispersing and dosing units. Numerous implementations in pharmaceutical and chemical industry, food and beverage technology or soil science just denote the array of applications in industry and research. The most prominent feature is an exposure time within the sub-nanoseconds regime allowing for an image capturing frequency of up to 500 frames per second. Initially, this ensures a high confidence level for measuring results based on a great number of observations. At the same time, the characterisation of finest, cohesive powders with RODOS becomes an option. The necessary level of energy application for effective dry dispersion results in particle flows with velocities of up to 100 m/s. The extremely short exposure times ensure capturing and clear imaging of even fastest singular particles. Powerful evaluation software supports the simultaneous determination of all relevant size and shape characteristics. A particle gallery together with diverse screening criteria facilitate creation of specific and meaningful reports even if several millions of particles are captured. Due to modular placed disperser and dosing units the analyser fits flexible for dry and wet applications generating product-specific characterisation.

Total Laboratory Services are a UK distributor for Quality Lab Accessories (QLA). We can supply all manner of dissolution accessories and consumables across all major manufacturers, making us your one-stop-shop for dissolution spares. QLA is the leading name in dissolution accessories, with a global reputation second-to-none.

Jaytee have evolved a complete system of instrument qualification offering the customer a much more comprehensive service. We have developed a unique system to ensure that all customer labs can meet, with confidence, the criteria required by the various regulatory bodies. Four stages for Compliance: Jaytee’s approach to qualification is divided into four stages. Each stage allows you to achieve your goals, without the need to set up your own elaborate systems and procedures. Consultation – Deciding your qualification strategy and the tests that you require. Adaptation – Forming a set of procedures from the information gained from the consultation stage. Implementation – Using the unique combination of procudures to generate the required documentation and start the qualification process. Review – At regular intervals we review the qualification procedures with our customers to ensure that the methods are updated to the latest specifications. The Agreement Consultation stage is free of charge - Analyse current checks that are performed - Qualification schedules are drawn up, along with testing agreement - Quotation provided for qualification agreement - Quote accepted - Adapt and implement the “Four stages for Compliance” This whole process is designed to reduce the cost burden of implementing successful qualification at a competitive price. The need for documentation Jaytee are very aware that the quality of all documentation, from procedures to certificates and raw data forms, must be of the highest standards. We ensure that all documentation is controlled and signed off at the time of the qualification. Qualification Certificates Based on validated spreadsheets, our certificates are customer specific, but are based on a collection of standard certificates linked together. Full Data Audit Trail Supplied with the qualification certificates is a collection of completed standard forms that are used to record the results.