IKA oxygen bomb calorimeters are the market leaders when it comes to determining the calorific values of liquid and solid samples. The selection of IKA oxygen bomb calorimeters is optimally geared towards various different demands.

Any LC-MS (Liquid Chromatography Mass Spectrometry) requires a reliable source of Nitrogen gas and to meet the specific market demands, F-DGSi’s very first gas generator that was manufactured was a Nitrogen generator. With more than 15 years of experience, our CALYPSO range has become the benchmark. Thanks to the robust architecture and stable operation helping the various manufacturers LC-MS to run continuously 24*7. CALYPSO comes in two technologies, you can chose depending on the purity and sensitivity requested by your analysis. The two technologies available are called PSA and Membrane.

The CAMAG Automatic Development Chamber 3 (ADC 3), offers consistent, fully automated plate development in High-Performance Thin-Layer Chromatography (HPTLC) to support reproducibility and data integrity. Designed for 20 x 10 cm HPTLC plates, the ADC 3 features an integrated Twin Trough Chamber that ensures stable analytical conditions and minimizes variability. It offers full flexibility in solvent selection and development parameters, supporting a wide range of applications. All critical steps – saturation, activation, pre-conditioning, development, and drying – are fully automated to eliminate environmental influences and deliver reproducible results. The built-in humidity control enables chromatography at defined layer activity, essential for robust method development and for evaluating humidity effects. Seamless integration with visionCATS software ensures compliance with cGMP/GLP and 21 CFR Part 11, making the ADC 3 a reliable choice for regulated laboratories that demand precision, traceability, and efficiency.

Spraying device for the automated derivatization of TLC/HPTLC plates ​ The CAMAG Derivatizer sets a new standard of reproducibility and convenience in reagent transfer onto TLC/HPTLC plates by employing a unique “micro droplet” spraying technology (patent pending). The device is suitable for all common reagents. In addition to the unsurpassed homogeneous reagent distribution, the Derivatizer offers other advantages as compared to manual spraying. Environmentally friendly and safe handling through a closed system User-independent results Low reagent consumption, i.e. 4 mL for 20 x 20 cm plates and 3 mL for 20 x 10 cm plates Intuitive operation and easy cleaning ​ Derivatization means another step in the process of planar chromatography, consequently causing an increase in variance. Even with a trained, expedient technician manually spraying a reagent, the relative standard deviation (RSD) of the measured values rises up to 12%. Using the CAMAG Derivatizer, the RSD increases by less than 5%, thus providing very reproducible results, equal to those obtained with the Chromatogram Immersion Device, yet consuming considerably less reagent. ​ The following most common reagents have been tested and validated by the CAMAG laboratory for use with the CAMAG Derivatizer: • Sulfuric acid reagent (10 % in methanol) • Anisaldehyde reagent • Natural product reagent • Polyethylene glycol solution • Iodine solution (0.5% in ethanol) • Dragendorff reagent • Fast blue salt B reagent • Ehrlich’s reagent • Phosphomolybdic acid reagent • Ninhydrin reagent • Copper (II) sulfate reagent • Aniline-diphenylamine-phosphoric acid reagent • Vanillin reagent • Potassium hydroxide solution (5% in methanol) • Aqueous solutions (enzymatic solutions, etc.)

The TLC Visualizer 3 is a high-end imaging and documentation system with superior performance in white light, long-wave UV (366 nm) and short-wave UV (254 nm) ensuring illumination with maximum homogeneity. Designed for the acquisition of premium-quality images, the TLC Visualizer 3 features a high-performance industrial camera of the newest generation equipped with a CMOS image sensor. The visual presentation of the entire chromatogram showing references and samples side by side is a unique feature of High-Performance Thin-Layer Chromatography (HPTLC), allowing the convenient evaluation of multiple samples in parallel. Powered by visionCATS HPTLC software, the TLC Visualizer 3 allows the detection of even the faintest zones and ensures reproducibility at a maximum level, while maintaining cGMP/GLP and 21 CFR Part 11 compliance. Key Features: • Maximum illumination homogeneity in white light, UV 366 nm and UV 254 nm • High-performance industrial camera with CMOS image sensor • Powered by visionCATS HPTLC analysis software • Various image enhancement tools for the detection of even the faintest zones • Side-by-side display of tracks from different plates • Image-based evaluation • Full compliance with cGMP/cGLP and 21 CFR Part 11

visionCATS stands for ease of use and intuitive simplicity. The software organizes the workflow of HPTLC, controls the involved CAMAG instruments, and manages data. The easy to navigate user interface effectively guides the user through the chromatographic process – from definition of samples and substances to reporting of results. Simply select one of the default methods and start working: fill in the sequence table, select a mobile phase and the derivatization reagent. Creating your own method is easy as well: just select the desired steps. The new sample-oriented approach allows for creating virtual plates from tracks originating from different plates, e.g. for batch-to-batch comparison or long-term stability testing. Featuring: Image Comparison Viewer With the Image Comparison Viewer tracks originating from the same or different plates and/or different detection modes can be compared on the same screen side by side. Image Enhancement Tools visionCATS supports low-noise, high-dynamic-range imaging (HDRI) and includes a comprehensive set of Image Enhancement Tools. Scanning Densitometry and Spectral Evaluation Following their chromatographic separation substances on the plate can be measured by Scanning Densitometry. Recording of UV/Vis spectra and their comparison with reference spectra allows identification. Quantitative Analysis To determine the substance concentration in a sample after densitometric or image analysis, five different quantification functions (e.g. linear and polynomial regression modes) are available. Several scanning steps and up to five different evaluations can be performed in one analysis file. ​ HPTLC Method Library for licensed users visionCATS supports compliance with cGMP/cGLP and 21 CFR Part 11. State-of-the-art Software Architecture visionCATS is based on a client/server system, enabling scalability from a single workstation to a multi-user lab network.

Brochure detailing Cambridge Glassblowing services.

The Cannon CAV 4.1 is a fully automated, single-bath, benchtop viscometer that replaces the obsolete CAV-2100. It features two 14-position sample handlers for unattended D445 processing, each with a 100-fold viscosity range from 0.5 to 10,000 mm2/s (cSt) from 40 to 150 °C (down to 20 °C with optional cooler). The CAV 4.1 conforms to ASTM D445/446 and is used for a variety of applications, including formulated oil analysis, hydraulic oil analysis, additive analysis, marine fuel testing, base stock analysis, light and heavy fuel testing, waxes/paraffin, crude oil testing, and glycols/polyols.

The CANNON CCS-G6 is an advanced automated cold-cranking simulator designed to measure the apparent viscosity of engine oils within a temperature range of –40 °C to –5 °C. This state-of-the-art device features automated sample loading, solvent-free cleaning, and the capability for unattended processing of up to 14 samples. Specifically engineered for engine oils and lubricating base stocks, it adheres to ASTM D5293 and SAE J300 standards. Key components of the system include: - A patented thermoelectrically-cooled rotor/stator - Vacuum system - Injection pump - 14-position sample carousel - Integrated chiller - Temperature verification kit - Proprietary software - Cannon CL viscosity standards.

If you're in the manufacturing sector, a robotic palletizing solution could be beneficial for you. Palletizing is a simple, repetitive task and is the action of placing finished products on a pallet ready for shipment or storage in the logistics supply chain. By introducing robotic palletizing solutions, it ensures you get the flexibility, productivity and reliability you need to meet ever shorter product life-cycles, new packaging designs, multiple pack sizes & product variants and batch manufacturing. Selecting the right robot for your application is critical, and that’s why we are here to help. The following factors: payload, duty, reach, cycle time, weight of products and floor space, all affect which robot is suitable for your project. Applied Integration have an in house digital twin team who can set up the process and make modifications in a virtual reality (VR) environment before being applied to the final system, avoiding risk and loss of production.

Foxx Life Sciences offers a premium line of high quality, innovative laboratory Carboys. Our versatile carboys aim to take full advantage of storage and/or transportation efficiency at minimal effort. The shape, size of the handle, grip, and neck, and imprints were designed and developed to provide the ultimate end-user experience. Furthermore, all Foxx laboratory carboys and bioprocess carboys are BPA-free, made from a USP Class VI material, and are FDA Grade for optimum protection of your assets.

Appleton CardBox racked pipette tips are the sustainable alternative to standard plastic racked tips. Instead of being housed in plastic, the pipette tips come in robust cardboard racks. These durable racks work effortlessly with single and multi channel pipettes – for easy loading and unloading. -Tip racks made from 100% biodegradable paper material -Material used is built to last – providing durability that rivals plastic racks -Plastic consumption reduced by 60% compared to traditional plastic racks -Our technology minimises the risk of particles collecting on the surface of the tips, reducing the possibility of contamination and error. -Non-autoclavable and pre-sterilized for immediate use

Confidence in your results and compliance with regulatory requirements can only be ensured with regular professional maintenance of your instruments. As one of the most widely used pieces of laboratory equipment this is critical for pipettes. In partnership with Sartorius, Alpha Laboratories now brings you a choice of internationally recognised expert pipette calibration services that you can trust and rely on. The combined scope of knowledge expands beyond Sartorius and Alpha instruments to directly provide all calibration needs, including other manufacturers’ brand equipment, giving you a single point of service for all your pipettes. These include single and multichannel, electronic and mechanical pipettes, as well as dispensers. At the new website www.alphalabservice.co.uk you will find expert support to help you choose the best service and calibration to suit your requirements. From understanding the different calibration options and number of readings taken for assessment of accuracy, precision and linearity, to deciding whether you need standard or UKAS certification. The flexible range of services can be performed through mail-in to our dedicated calibration laboratory, or for larger numbers of pipettes and a fast turnaround, our specially trained field service technicians will come to you.

The CBC 5 control is a powerful refrigerated and heating circulator with strong heating and cooling power for an operating temperature range of - 25 °C to + 200 °C. It is best suited for external applications thanks to its proven pressure and suction pump. High-quality insulation of the device allows for fast heat-up times and reduces heat input at low temperatures. All parameters are manageable (read out, monitored and completely documented) by software (e. g., labworldsoft(r) or NAMUR commands). High performance pressure/suction pump (speed-controlled) Industry standard TFT display for maximum visibility (pump speed, temperature) Adjustable safety circuit Visible and audible alarm Safety drain valve USB / RS 232 interfaces (labworldsoft(r) and enabling online updates of device software) Connection for external temperature probe (PT 100) and optional external solenoid valves (multi-IO port) Safety classification III (FL, DIN 12876) Removable WiCo (wireless controller) enables safe remote operation, e.g. outside of a closed fume hood