A 6 mm-thick, electroconductive multi-layered, interlocking, loose lay, heavy-duty vinyl tile reinforced with two fibreglass grids offering outstanding resistance to traffic. The Evercare™ surface treatment provides high stain resistance, easy maintenance, no wax for life and is designed for decontamination protocols. The carbon encapsulated granules throughout its full thickness, and its conductive backing and conductive surface treatment, ensure optimal and consistent conductive properties throughout its full life expectancy. Features and benefits: Fast and easy installation, no need to close premises. A renovation solution – direct installation on existing floors/ problem subfloors. Resistant to high traffic and can withstand heavy loads. Conductive properties throughout its life expectancy. Low static electrical propensity. 100% recyclable and contains 50% recycled content. Also available as a GTI EL5 Cleantech version (600 x 600 mm, not interlocking), with welded joints for clean environments and watertight system requirements (specified separately).

A 6 mm-thick, multi-layered, loose-lay vinyl tile with a PUR+ surface treatment. GTI Max Cleantech has welded joints, is designed for industrial applications and suitable for very high traffic areas. Its advanced design allows it to withstand the heaviest traffic. The design incorporates a backing layer and two glass fibre grids with a recycled interlayer for extreme dimensional stability against rolling loads. Densely pressed colour chips throughout the 2.0 mm-thick pure colour wear layer provide a high level of wear resistance. Features and benefits: Fast and easy installation. A highly durable PUR+ surface treatment for easy maintenance. Extremely hardwearing – triple pressed at over 3000T. Type binder content I. Slip resistant – R10. Reduced noise of foot and rolling traffic. 100% recyclable and contains up to 80% recycled content. Also available as the GTI Max Connect tile (with interlocking dovetail joints - 635 x 635 mm), specified separately.

Reliable Hotplate Stirrers with Exceptional Safety Features for Everyday Use. OHAUS Guardian 5000™ Hotplates Stirrers are designed for safety and simplicity in all research, academic and industrial applications. The design ensures proper mixing and temperature control of the top plate or your sample when using the optional temperature probe. Heating models include a Single Point Calibration feature for multiple setpoints. Select from five models with three plate sizes for your everyday heating and stirring applications.

Durable Hotplate Stirrers with Superior Safety Features and Intelligent Performance. OHAUS Guardian 7000 Hotplate Stirrers are designed with outstanding safety features and superior heating and mixing performance. The SmartHousing™ is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons as well as temperature, speed and time settings – all designed to monitor performance from across the lab.

Rugged and Reliable Analog Hotplates and Stirrers for General Purpose Heating and Stirring. Dependable OHAUS Guardian 2000 Hotplates and Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE-coated stir bars.

Affordable Digital Hotplate Stirrers Designed for Safety, Powerful Stirring and Rapid Heating. OHAUS Guardian 3000™ Hotplate Stirrers are designed for economical heating and stirring in all laboratory settings. The bright LCD display includes easy-to-read temperature and speed settings, intuitive icons and a prominent hot top indicator that lights up when the heater is above 40°C. Select from three plate sizes to suit your application. All models can be used with the optional temperature probe for precise temperature control of the sample.

Work with your valuable samples without cross-contamination STARLAB’s new GuardOne® Workstation provides the ideal workspace for sensitive and critical applications requiring a clean environment, or protection from potential contaminations by bacteria, DNA or RNA. GuardOne® minimizes cross-contamination risk and protects your valuable samples and reagents and saves you time by not having to duplicate your work. The GuardOne® Workstation with silent, energy-saving fan, real-time airflow measurement and two stage filter system creates an ISO 5 cleanroom environment* to improve your results. The UV lamp with timer function allows you to easily decontaminate the working area whenever needed. Made from optically-clear, UV-impermeable polycarbonate, GuardOne® provides the user with an optimal view while working and full protection from harmful UV when decontaminating. A safety-switch on the sash door prevents any UV use while working. Every aspect of GuardOne® has been designed with convenience in mind. All functions can be controlled via the intuitive touchscreen that is compatible with laboratory gloves. The integrated lab timer, constant monitoring of the UV lamp and the HEPA filters lifespan will ease your work further. Check the GuardOne® status at a glance and at any time, using the colour coded status indicator on the touchscreen.

The H12 is a high-performance, recirculating chiller engineered for precision temperature control in demanding laboratory and manufacturing environments. Delivering up to 12kW of cooling, the H12 utilised the low-GWP refrigerant R454C to offer efficient performance with enhanced environmental compliance. Product Features: • Up to 12kW cooling capacity – ideal for larger scale applications • Utilises R454C, a lower-GWP alternative that aligns with evolving F-Gas regulations and reduces environmental impact • Designed with three condensers and six cooling fans, the H12 offers built-in redundancy, ensuring reliable performance and resilience even under demanding operating conditions • Optional extended temperature range giving flexibility for specialist applications • Constructed from durable 1.5mm sheet steel with a powder-coated finish. Fitted with castors – two swivel and two braked – for easy mobility

This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks Hydrogen generation if it detects an amount greater than the safety threshold. The sensor is engineered to work in standalone mode connected by RS-485 network to a Hydrogen Generator. The sensor can be connected directly with the LNI Hydrogen Generators. When the hydrogen concentration detected exceeds a threshold of safety, the Hydrogen Generator automatically stops the production and audible and visual alarms will be reported. Alternatively, the optional block can be use, where a solenoid is deactivated in the presence of a leak, isolating the supply of Hydrogen, or switching to an alternative gas.

This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the working environment of the lab and blocks Hydrogen generation if it detects an amount greater than the safety threshold. The controller reads the percentage of Hydrogen measured by the sensor and, if the value exceeds the threshold alarm, the Controller triggers a shutdown on the generator, or deactivates the solenoid valve in the optional block to switch to an alternate gas or isolate the gas supply. The alarm can be signaled to a PC and to a remote device.

Made for use in the lab and on-the-go, the DensitoPro is perfect for all kinds of applications, from quality control of incoming goods to at-line quality assurance. With the built-in RFID and barcode scanner, full sample identification is performed automatically.

The Brady i3300 Label Printer is a completely hassle free, easy to use PC-based printer. It can print an extensive range of labels for laboratory identification The Brady i3300 is extremely easy to use and features auto-calibration and automatic label material setup. This will enable you to immediately start printing the signs and labels you need. Switching to another label material is easy and extremely fast thanks to the printer’s ‘drop-in’ label materials and matching ink ribbons that can be switched out in less than 20 seconds. When used with Brady Workstation apps, a wide variety of sign & label design options becomes available

The HBC 10 control heated bath circulator heats up to a max. temperature of 250 °C. It has a high quality stainless steel bath with a volume of 7.5 – 10.5 liters. The TFT display is in color and illustrates all relevant parameters. With just one key, the internal temperature regulation can be switched to external temperature regulation. The large surface of the radiator allows for an optimum heat exchange and a gentle heating process of the medium. Push and turn buttons allow for intuitive menu navigation. The menu comes in different languages. The bath has a front drain valve for safe emptying. In order to drain the system, a hose is connected so there is no direct contact with the tempering fluid. With the unique WiCo Wireless Controller, the unit can be operated from a distance of up to 10 meters/3 ft. Temperature range: 20 – 250 °C Temperature accuracy: ± 0.1 K Wireless controller (WiCo) enables safe operation, e.g. outside of a closed fume hood Large easy to read TFT display for temperature, pump speed, filling level and safety temperature Powerful, speed controlled pressure/suction pump Integrated cooling coil Adjustable safety circuit Safety classification III (FL) according to DIN 12876 Electronic timer function: 0 – 99 h 59 min Visual and acoustic safety warnings Connection of a magnetic valve possible USB / RS 232 interface for PC control and documentation using labworldsoft®, as well as updating the device software through our website

IKA heating baths - the best choice when it comes to heating and tempering in the lab. IKA heating baths shine due to their stellar safety characteristics. All baths are equipped with a double jacket for protection against burns and a safety temperature monitor to keep the bath from over heating.

The Felcon Laminar Air Flow Module is designed to provide product protection by creating a particle-free working environment. This is achieved by passing clean air through a HEPA filter which then prevents contamination through the main working area.