MA 50.5Y Moisture Analyzer

MA 50.5Y Moisture Analyzer

Maximum capacity [Max]: 50 g
Readability [d]: 1 mg

It Dries in 4 Ways
The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step.

1. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content.
2. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather.
3. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent.
4. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally.

Drying Temperature
The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally.
The device allows drying at temperatures of up to 160 °C.

How Do I Finish the Drying? In 4 Ways
The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined.
1. Automatic mode
2. Manual mode
3. Time-defined mode
4. User-defined mode